started on something new today

[Mol]

AND I CAN NOT WAIT TO GET IT DONE.:sgrin:

http://i513.photobucket.com/albums/t339/molsrt8/bezel/nitrousparts002.jpg

[4rwheeler]

Not too knowledgeable about NO2, but would that be a direct port set up? Any cool ideas for purge location?

[BigAl470]

sweet azz sweet brother

[Steve]

Hardlining the air system? Is that copper or stainless?

[Mol]

Not too knowledgeable about NO2, but would that be a direct port set up? Any cool ideas for purge location?

i am using the BWOODY plates that go under the intake manifold and a NITROUS OUTLET plate behind the t-body. can not do nozzles on the left side of the motor do to the vortech intake hose. i am going to purge into a set of spray tube that will freeze the intercooler heat exchangers behind the grill.
http://i513.photobucket.com/albums/t339/molsrt8/Crusin%20for%20a%20Cure%20LX/cruizinforacure08080.jpg


Hardlining the air system? Is that copper or stainless?

no sir, this one is a more power mod.

[4rwheeler]

Holy crap man. Blower and nitrous. I have seen some imports running dedicated sprayer system for their intercoolers. Hope you go fast and don't blow yourself halfway to the moon.

[Mol]

Holy crap man. Blower and nitrous. I have seen some imports running dedicated sprayer system for their intercoolers. Hope you go fast and don't blow yourself halfway to the moon.

me too.:sgrin:

[Mol]

here is a pic of the rest of what i have. i am still waiting for my custom solinoids from nitrous express, hopefully next week. then for the hoses.

http://i513.photobucket.com/albums/t339/molsrt8/bezel/nitrousparts003.jpg

[TheFOSS]

VERY VERY VERY SWEET@! Can't wait to see it done...

[MagWag]

dang Mol! As if u really need it!


Beans for it!

[Cappadocious]

Holy Cow! Just when I thought there wasn't much left you could do to your ride...

[Magmania]

I'm not a big power and performance guy, but it looks fantastic!
Can't wait to see it installed.

[STLTH WGN]

what is all that stuff??? looks like a bunch of legos

[Gomojo31]

always up to somethin!! Good stuff man, some videos when you're done would be schweeet!!!

[BigAl470]

time to dust off the camera and watch MOL light the fires under the tires...

[hemi_charger]

what I dont get it, AC parts? whats this n20 everyone keeps talking about? :sgrin:

[UPS92008]

Looking good Mol!!!!:headbang::headbang::headbang:

[TheFOSS]

Is it done yet??

[Kingswingin]

MOL?! DAYYYUM. Seriously. Dude. Really. Wow.
*deep breaths*
That's freakin' awesome. I can't wait to see it done. Holy ballz

[TheFOSS]

Updates??

[Greg]

MOL, I want your job!!!

[SoCalRT]

You got this done yet Ralph???

[ViperJeff]

Sure hope your doing progress pics of the different stages of assembly

VJ

[BigAl470]

hook it up buddy I know he is at sdcarguys house doing something better get over there and see whats going on

[Mol]

MOL, I want your job!!!

i do not have one. guys they sent me the wrong tubing bender hope to have the new one on monday and i will take pics.

[UPS92008]

F*** those guy for sending the wrong stuff:rocketwhore:

[TheFOSS]

^^^:werd:

[Strykker]

Waiting patiently. That is some serious modding there. I am looking for a winter project too...HUMMMMM

[Cappadocious]

Juice it up man!

[Mighty Noid]

This sh!t is still not done... what the hell!!!

Hurry up... you think that we have all day just for you...


:)

[BigAl470]

MOL is dragging his feet on this im gona have to take some time off work to hook it up for him.. J/K MOL will not start any project till he has every little part very patient he is....

[Mighty Noid]

He can throw the plates on and the TB one as well... come on MOL!!!

You are just waiting for the NOIDs to come in... you can everything else ready to go...

MOVE IT!@!

:)

[Mol]

just got a call this morning that the custom soleniods will be shipped today.

[BigAl470]

Rock and roll brother!

[Mighty Noid]

Yeah!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Mol]

^^^ i know you would like that!

[Cujofreak]

Did you get em yet??? Hook that baby up and continue to embarrass every 22 year old kid with a Honda Civic!

[Mol]

ok, nitrous express mailed my solenoids on wensday and i got my new tube bender friday so it was time to sit down and get some work done.

it started like this!
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing001.jpg
than this!
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing010.jpg
here it is off the manifold, not a perfect job but it will work.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing013.jpg
plumbing hard lines is done.

[Cujofreak]

Dude, that looks great so far. We'll definitely need a track video of this bad boy when you're finished

[ViperJeff]

Man that is nice

Also can't wait to see a track run

Good Work!

[Fade2Black]

Holy Mary Mother of Gawd!!! Looks like some very detailed and precise work. I get confused tying my shoes on so I could only imagine the $hitstorm I'd be in if I had to try what you just did.

Keep doin' the lords good work brotha!

[Mighty Noid]

MOL...

That is looking great!!

Nice job!!

[Mol]

ok, the ups guy stopped today and brought me a box.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing016.jpg
and for all you nitrous guys who say "hay stupid those are all fuel solenoids", i had nitrous express do the n2o solenoids in red (custom) to match all my underhood pieces.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing017.jpg
tomarrow i should get some of the fittings and the intercooler spray bars that i ordered. then all i need to do is measure for the custom made hoses (red fitting with black hose).

[MagWag]

man Mol, that is SO awesome!!!!

[SoCalRT]

That is lookin' sweet Ralph...

[BigAl470]

yeah baby get that s*** spraying i want to go for a ride

[TheFOSS]

WOW.. so pretty!@

[cjcady73]

Sssswwwwwweeeeeeeeeeeeeeeeeeeeettttttttttt!!!!!!!

[Mol]

GOT A COUPLE OF THE SOLENOID HUNG TODAY, HERE IS A PEAK.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing025.jpg
MADE MY OWN BRACKET OUT OF 2"X1" ANGLE, WHEN IT IS FINISHED I WILL SEND IT OUT TO BE ANODIZED.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing023.jpg

[Gomojo31]

GOT A COUPLE OF THE SOLENOID HUNG TODAY, HERE IS A PEAK.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing025.jpg
MADE MY OWN BRACKET OUT OF 2"X1" ANGLE, WHEN IT IS FINISHED I WILL SEND IT OUT TO BE ANODIZED.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing023.jpg

that's beautiful man, have a bean

[Mol]

Thanks, just putting it together one piece at a time.

[MagWag]

now thats doin it right, great craftsmanship on a lil part that most would overlook!

[Mol]

now thats doin it right, great craftsmanship on a lil part that most would overlook!

can't wait to get the hoses finished, they are stainless braid over teflon (normal high pressure hose) with a black jacked coating and all custom red ends.

[BigAl470]

Ralph you amaze me with your skills... you are the master!

[Mol]

ditto bro.

[UPS92008]

Hey Ralph? How am I gonna keep up with you on the way to hooters? Heck even gas is cheap right now. Im screwed, please give me a head start. Hehehehehe.

Looks good for sure.

[Mol]

Hey Ralph? How am I gonna keep up with you on the way to hooters? Heck even gas is cheap right now. Im screwed, please give me a head start. Hehehehehe.

Looks good for sure.

you got another week til the hoses come back from being assembled. hahaha

but you will get to see most of it on sunday.

[TheFOSS]

I can't wait to see under your hood!@ lol

[Mol]

the next pics posted will be of the completed project.

[UPS92008]

I can't wait to see under your hood!@ lol


Ya Ralph gets that a lot! Hehehehe.

Its not a HEMI, its a frickin nuclear reactor! That looks pretty. Hehehehehe

[Greg]

i do not have one. guys they sent me the wrong tubing bender hope to have the new one on monday and i will take pics.

Then I want you to be my financial adviser.

Hows the progress. You gonna finish in time for Spring Fest? :tongue:

[QuickSilver08]

Sickest SRT. You win.......now give me the 6.1 and do the 8.4 swap!

[Mol]

Ya Ralph gets that a lot! Hehehehe.

Its not a HEMI, its a frickin nuclear reactor! That looks pretty. Hehehehehe

next thing i need to do is adust the flux compassitor. lol


Then I want you to be my financial adviser.

Hows the progress. You gonna finish in time for Spring Fest? :tongue:

i will take that job, do i have to move to utah?

i should have it done in time to test it at the dragstrip in fontana on dec 6th. and i might have even a bigger surpise in store for spring fest.

[BigAl470]

and i might have even a bigger surpise in store for spring fest.

Holding out on me damn brother we need to talk tonight! :silly:

[Mol]

Holding out on me damn brother we need to talk tonight! :silly:

you have already proven to me that you can not keep your lips shut. hahaha:silly:

[Greg]

i will take that job, do i have to move to utah?

No, but it would be a pretty easy job. I gots no money to advise.


you have already proven to me that you can not keep your lips shut. hahaha:silly:

BUUUURRRRNNNNN!!!

[Mol]

Holding out on me damn brother we need to talk tonight! :silly:


you have already proven to me that you can not keep your lips shut. hahaha:silly:

besides that you already know what it is! and there will be no talking over dinner, just the eating of delicious chinese food.:tounge-in-cheek::tounge-in-cheek::tounge-in-cheek::tounge-in-cheek::tounge-in-cheek::tounge-in-cheek::tounge-in-cheek:

[STLTH WGN]

you have already proven to me that you can not keep your lips shut. hahaha:silly:



bro you've just been slapped and called a red headed step child!

[onelook]

Bump!! Where are the completed pics, Mol??? :wink:

[Mol]

i just finished the plumbing and underhood wiring today and am waiting on my bt switch panel. will post pics later tonight.

[Mol]

got the plumbing and the under hood wiring finished this weekend. just waiting on my switch plate.
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing035.jpg
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing037.jpg
http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing038.jpg

this is the best mod you can do to a mod. added a drain hose to my bt catch can.

http://i513.photobucket.com/albums/t339/molsrt8/nitrous%20plumbing/nitrousplumbing042.jpg

[Magmania]

Very nice MOL!
How do you utilize your catch can drain?
Do you just manually open a valve to drain or is it something that is done automatically?

[Mol]

Very nice MOL!
How do you utilize your catch can drain?
Do you just manually open a valve to drain or is it something that is done automatically?

i had a hose made that is going that is going to mount on the lowwer cross member next to the supercharger oil drain hose, with a plug in it.

[TheFOSS]

Awsome.. very nice looking!@ Love the drain hose idea!@

[Mol]

Awsome.. very nice looking!@ Love the drain hose idea!@

i just got tired of banging my knuckles on the radiator hose clamp.

[TheFOSS]

^^^ don't blame you.. i will prolly copy that idea.. when i get a catch can!@ lol